You have no items in your shopping cart.
We've all been there when baby throws the dummy out of the buggy at the most inconvenient of moment. Now you can clean and sterilise soothers quickly and easily when you're out and about. This 100% watertight soother steriliser is simple and quick to use. Before leaving home, simply fill the Milton Mini with cold water and add one Milton Mini Sterilising Tablet. The unique sponges inside the Mini absorb the solution to avoid spills as well as helping remove dirt from the teat. Add the soother, replace the watertight lid and after only 15 minutes the soother is sterilised and ready to use straight away with no need to rinse. You can reuse the same solution throughout the day and the adjustable strap means you can attach the Mini to your buggy or change bag so you can make sure you always have a sterilised soother to hand. Please note: When opening the Mini don't be alarmed if it appears damp inside..... It's supposed to be. The Steriliser is filled with 5ml distilled water to keep the sponges moist. Ingredients Active Ingredient: Sodium Dichloroisocyanurate (CAS: 2893 - 78-9): 19.5% w/w Directions How to sterilise 1 Clean When at home: wash the soother in warm soapy water and rinse in cold water. Away from home: if no water is available, wipe off excess debris from the soother with a clean tissue. 2 Prepare the Solution Important: if the sponges have dried hard then soften them by adding water before attempting to remove them. Fill the Milton Mini with cold water to the fill line. Add 1 Milton Mini Sterilising Tablet and ensure it dissolves fully. Place the solid sponge first slowly in the solution at the bottom of the Mini. Secondly, position the sponge with the hole above the solid one. The two sponges should absorb all the solution, but tip away any excess fluid which has not been absorbed. Ensure that the top of the sponge with the hole is contained underneath the shoulder of the Milton Mini base. 3 Insert Soother Insert the soother teat into the hole in the top sponge, press the soother down and twist to clean the teat. 4 Screw the Top On 5 Wait 15 mins 6 Ready to Use No need to rinse the soother before use. Did you know? Soothers can be added and removed from the same solution throughout the day, as it only needs changing every 24 hours. Simply add soother to the Milton Mini and after 15 minutes it is sterilised and ready to use again, with no need to rinse. Safety Warning Dangerous to the environment Harmful Warnings - Contains: 613-030-00-X Troclosene Sodium. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Irritating to eyes and respiratory system. Harmful if swallowed. When in contact with an acid, releases a toxic gas. Keep out of the reach of children. If swallowed, seek medical advice immediately and show this container or label. Keep away from food, drink and animal feeding stuffs. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Take care not to splash the made-up solution when removing the soother or the sponge, as the solution may discolor fabrics. Do not empty into drains. Box Contains 28 x Sterilising TabletsIngredientsActive ingredient: Troclosene Sodium (CAS: 2893-78-9): 19.5% w/wDirectionsDissolve 1 Milton tablet in 5 litres of water. Wash bottles and utensils before immersing items in the solution. They are disinfected and ready to use after 15 minutes. Do not rinse. Renew the solution after 24 hours.Safety WarningHarmful if swallowed. When in contact with an acid, releases a toxic gas. Irritant for the eyes and respiratory system. Risk of heavy eye damage. Toxic to aquatic organisms, can be harmful in the long term to aquatic life. When in contact with the eye, rinse well and contact a specialist. If swallowed, contact a doctor and show the packaging. Take care not to splash the solution as it may discolour fabric. Keep away from children. Keep the pack closed away from dampness To sterilize baby's soother whilst on the go